APC AR3107 Netshelter SX Deep 48U 600mm x 1070mm Server Rack Cabinet Enclosure. Rack chassis has been damaged along the top at the rear(as per picture’s). Both rear door has damage (as per picture’s). Rear doors operation is OK and do close and can be locked. 1 x APC AR3107 Netshelter SX Deep 48U 600mm W x 1070mm Server Rack Cabinet Enclosure. NetShelter SX 48U 600mm Wide x 1070mm Deep Enclosure with Sides Black. Tall enclosure with 48U spaces for additional equipment. Compact width to optimize data center space. For low to medium density server and networking applications. NetShelter SX Features & Benefits. Schneider Electric Rack Systems Compatible. Compatible with a variety of Schneider Electric rack accessory products to provide the ability to create a complete rack system. Configure rack solutions using industry leading Schneider Electric Design Portal – Small IT Solution Designer configurator complete with verification of product compatibility and useful 3rd party equipment catalog to aid in visualizing your ideal rack solution. Integrated with InfraStruxure products. Schneider Electric cooling, power distribution, and cable management products work seamlessly with IT enclosures to provide a complete infrastructure support system. Optimized for high capacity cable management systems. NetShelter SX enclosures are optimized for use with high capacity cable management systems that attach to equipment mounting rails inside enclosures aligning with equipment mounting u-spaces and provide channels for routing and managing cabling. Vendor-neutral EIA-310 19in Rack Mounting Compatibility Guaranteed. Vendor-neutral mounting for guaranteed compatibility with all EIA-310 compliant 19 equipment. No need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. Cable access openings with pre-installed brushes. Large cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Roof includes openings with brush strips pre-installed in locations biased towards the front of the enclosure to allow for data cable passthrough and provisions for air containment. Enclosure adjustment tools and hardware provided. All enclosures are provided standard with hardware bag that includes hardware for mounting IT equipment and tools for simple enclosure adjustment. Front door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple lift-off design. Perforated front door with curved profile. Perforated front and rear doors provide ample ventilation for servers and networking equipment. Easily removable cable access roof. Roof can be removed with simple pull-pin hinges for access during equipment installation or even with cabling already in place and routed through the cable openings. Once removed the roof is reversible to reposition the larger cable openings for power distribution plugs and connectors. Half-height side panels and option with brush strips for pass-through. Side panels are lockable utilizing a single key with the doors. Now available are side panel options integrated with pass-through holes and brush strips for routing cabling to adjacent racks in a row while still maintaining proper airfow. Equipment mounting rails integrate with patch cabling systems. Equipment mounting rails include zero U mounting holes beside the EIA 19 mounting space that allow the installation of Data Distribution Cable (DDC) patch systems without taking up any critical equipment U-space. AV and Networking enclosure designs do not include hole locations for integration of DDC cabling. Other 1U, 2U, and rear enclosure zero U options are available for use with these enclosures. Eyebolt support integrated into enclosure frame. Integrated eyebolt holes at the top of the enclosure frame allow the enclosure to be lifted for movement and enclosure placement using eyebolt lifting mechanisms. Refer to enclosure user documentation for detailed specifications on eyebolt requirements and enclosure weight limits. Adjustable mounting rails with captive hardware and rapid alignment. The vertical mounting rails can be adjusted in 1/4 in (6.4 mm) increments covering virtually any mounting requirement for IT equipment. Easy alignment feature integrated into the enclosure mounting rail and side brace for quick alignment verification without the use of tools to verify alignment. U positions are numbered front and back for rapid installation of equipment. Pre-installed full-enclosure height rear accessory channels. Integrated and adjustable rear accessory channel provides zero U mounting locations for toolless accessories. Each channel has two mounting bays to support a combination of up to four accessories such as PDUs and vertical cable organizers. 1070mm (42in), 825mm (32 in), and deep enclosures and networking enclosures include two channels. 1200mm (48in) deep enclosures include four channels. Channels are pre-installed at the factory in the rear of the enclosure but can be moved to other locations of the enclosure along the side brace to resituate cable management where it is needed most. Enclosure assemble-to-order (ATO) options capable. The Enclosure ATO (Assemble-to-Order) options provide a level of customization for enclosure customers beyond the standard enclosure models. This customization is limited to the assembly of the enclosure itself and does not include additional enclosure mounted components. For example, the enclosure can be assembled without sides, doors, or without sides and doors. Integrated joining hardware with multiple width enclosure alignment. Enclosures include pre-installed joining hardware to join enclosures in a row and provide additional stability to the enclosure. The pre-installed joining hardware includes holes for joining to an adjacent enclosure at 600mm centers or 24in centers depending upon the floor layout. Split rear doors improve access and serviceability to rear of rack mounted equipment. The split rear doors help to maximize floor space. Only 11 inches (279 mm) of clearance is required behind the enclosures to allow for door swing. Low-profile castors and adjustable leveling feet from underneath or above. Leveling feet can be quickly adjusted through the use of a screwdriver or drill, eliminating the need to reach underneath with a wrench. The roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding. Designed for enhanced structural stability. A proven frame design, heavy-gauge mounting rails, and heavy-duty casters provide for 3000 lb (1364 kg) static (levelling feet) and 2250 lb (1023 kg) dynamic (castor) load ratings. Enclosures have been tested and approved to be combined with proper bolt down accessories to meet various seismic requirements. Maximum Height: 2258mm, 225.8CM. Maximum Width: 600mm, 60.0CM. Maximum Depth: 1070mm, 107.0CM. Net Weight: 138.23KG. Weight Capacity (static load): 1363.64 kg. Weight Capacity (dynamic load): 1022.73 kg. Maximum Mounting Depth: 915.0mm, 91.49CM. Minimum Mounting Depth: 7.52inches. Front Door: 16.0gauge. Vertical Posts: 16.0gauge. Rear Door: 18.0gauge. Side Panels: 18.0gauge. Protection Class: IP 20. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK. The item “APC AR3107 Netshelter SX Deep 48U 600mmx1070mm Server Rack Cabinet Enclosure” is in sale since Saturday, January 23, 2021. This item is in the category “Computers/Tablets & Networking\Enterprise Networking, Servers\Racks, Chassis & Patch Panels\Rackmount Cabinets & Frames”. The seller is “itinstock” and is located in London. This item can be shipped worldwide.
- Weight Capacity: 1363.64 Kg Static 1022.73 Kg Dynamic
- Number of Side Panels: 4
- Rack Unit Width: 19″
- Type: Rack Cabinet
- Rack Capacity: 48U
- Model: AR3107 Netshelter SX
- Mount Type: Free-Standing
- MPN: AR3107 Netshelter SX
- Rack Height: 2258mm
- Rack Depth: 1070mm
- Brand: APC